|
Compressor spiral unit AKV 4,5/1,0
Compressor unit is intended for compressed air feed of diesel locomotives' brake systems and pneumatic units.
Range of application: diesel locomotives 2TE25, TE25, TEM10.
Application in other areas is admissible if the operating conditions do not contradict the conditions that are stipulated in technical conditions and in maintenance manual.
Feature
Capability, m3/min |
4.5 |
Excessive discharge pressure, MPa |
1.0 |
Capacity of drive motor, kW |
37 |
The change of capacity is reached with kitting-up of various actuating motors.
The advantages against piston compressors: high reliability and durability, considerably lesser noise and vibration, lesser weight and dimension by the same capability.
Compressor spiral unit AKV 3,2/1,0
Compressor unit is intended for compressed air feed of diesel and electric locomotives' brake systems and pneumatic units.
Range of application: diesel locomotive TEP70, 2TE70, TEP70BS, electric locomotive EP2K.
Application in other areas is admissible if the operating conditions do not contradict the conditions that are stipulated in technical conditions and in maintenance manual of that aggregate.
Feature
Capability, m3/min |
3,2 |
Excessive discharge pressure, MPa |
1.0 |
Capacity of drive motor, kW |
25 |
The change of capacity is reached with kitting-up of various actuating motors.
The advantages against piston compressors: high reliability and durability, considerably lesser noise and vibration, lesser weight and dimension by the same capability.
Compressor spiral unit AKV 0,65/0,8
Compressor unit is intended for compressed air feed of brake systems and pneumatic units of electric locomotives, transit vehicles and trolley buses.
Range of application: electric locomotives, transit vehicles and trolley buses.
Application in other areas is admissible if the operating conditions do not contradict the conditions that are stipulated in technical conditions and in maintenance manual of that aggregate.
Feature
Capability, m3/min |
0.65 |
Excessive discharge pressure, MPa |
0.8 |
Capacity of drive motor, kW |
7.5 |
The change of capacity is reached with kitting-up of various actuating motors.
The advantages against piston compressors: high reliability and durability, considerably lesser noise and vibration, lesser weight and dimension by the same capability.
Compressor spiral unit AKV 0,3/0,8
Compressor unit is intended for compressed air feed of brake systems and pneumatic units of transit vehicles and trolley buses.
Range of application: transit vehicles, trolley buses.
Application in other areas is admissible if the operating conditions do not contradict the conditions that are stipulated in technical conditions and in maintenance manual of that aggregate.
Feature
Capability, m3/min |
0.3 |
Excessive discharge pressure, MPa |
0.8 |
Capacity of drive motor, kW |
5.5 |
The change of capacity is reached with kitting-up of various actuating motors.
The advantages against piston compressors: high reliability and durability, considerably lesser noise and vibration, lesser weight and dimension by the same capability.
Compressor system VV 0,05/7-1000
Compressor system is intended for compressed air feed of units for lifting of electric locomotives' and electric multiple-unit trains' current collector.
Drive dc motors P31M, P22M, supply voltage 50 and 110 V.
Feature
Drive dc motor |
P31M |
P22M |
Capability, m3/min |
0,05 |
0,07 |
Nominal (excessive) discharge pressure, MPa (kg/cm2) |
0,7 (7,0) |
0,7 (7,0) |
Nominal bent shaft speed, S-1 (turn/min) |
16,6 (1000) |
25 (1500) |
Overall dimensions, mm
length
width
height |
790
365
445 |
700
363
450 |
Mass, kg |
90 |
84 |
Spannung, V |
110 |
50 |
Electric compressor EÊ4B -Ì
Electric compressor is intended for compressed air feed of transit vehicles' brake systems and pneumatic units.
Feature
Driver of electric compressor |
Dc motor
DK 410R |
Supply voltage, V |
750 |
Nominal capacity, kW |
4,5 |
Capability, m3/min |
0,42 |
Nominal (excessive) discharge pressure, MPa (kg/cm2) |
0,8 (8,0) |
Nominal bent shaft speed, S-1 (turn/min) |
6,7 (400) |
Overall dimensions, mm
length
width
height |
1028
674
500 |
Mass, kg |
310 |
Electric compressor EÊ7V
Electric compressor is intended for compressed air feed of brake systems and pneumatic units of alternating current electric trains
Feature
Driver of electric compressor |
Ac motor MAK 160 M6 O1,
548A Î1 |
Supply voltage, V |
220/380 |
Nominal capacity, kW |
5,0 |
Capability, m3/min |
0,58 |
Nominal (excessive) discharge pressure, MPa (kg/cm2) |
0,8 (8,0) |
Nominal bent shaft speed, S-1 (turn/min) |
9,0 (540) |
Overall dimensions, mm
length
width
height |
939
704
510 |
Mass, kg |
454 |
Electric compressor EK4V-M
Electric compressor is intended for compressed air feed of brake systems and pneumatic units of street cars, trolley buses, diggers.
Feature
Driver of electric compressor |
Dc motor DK 410BÌ,
DK410R |
Supply voltage, V |
550 |
Nominal capacity, kW |
3,5 |
Capability, m3/min |
0,3 |
Nominal (excessive) discharge pressure, MPa (kg/cm2) |
0,8 (8,0) |
Nominal bent shaft speed, S-1 (turn/min) |
5,5 (340) |
Overall dimensions, mm
length
width
height |
938
628
465 |
Mass, kg |
310 |
Compressor VU 3,5/10-1450
Compressor is intended for compressed air feed of brake systems and pneumatic units of locomotives and other machines of rail transportation.
Feature
Capability, m3/min |
3,5 |
|
Nominal (excessive) discharge pressure, MPa (kg/cm2) |
0,98 (10,0) |
Nominal bent shaft speed, S-1 (turn/min) |
24,16 (1450) |
Overall dimensions, mm
length
width
height |
666
904
972 |
Mass, kg |
310 |
Compressor VV 1,75/9-1100
Compressor is intended for compressed air feed of brake systems and pneumatic units of shunting locomotives and diesel-multiple unit trains.
Feature
Capability, m3/min |
1,75 |
Nominal (excessive) discharge pressure, MPa (kg/cm2) |
0,9 (9,0) |
Nominal bent shaft speed, S-1 (turn/min) |
18,3 (1100) |
Overall dimensions, mm
length
width
height |
498
528
1041 |
Mass, kg |
265 |
Compressor VV 1,2/8-1100
Compressor is intended for compressed air feed of brake systems and pneumatic units of locomotives, track machines and construction machinery as well other modes of transport.
Feature
Capability, m3/min |
0,8 |
 |
Nominal (excessive) discharge pressure, MPa (kg/cm2) |
0,52 (5,2) |
Nominal bent shaft speed, S-1 (turn/min) |
12,5 (750) |
Power input, kW |
10,2 |
Overall dimensions, mm
length
width
height |
500
465
647 |
Mass, kg |
135 |
|
|
