Connector sleeves R11, R12, R13, R14, R17B
OKP code 31 8442
Connector sleeves are intended for provision of flexible permanent connection of air channels of rolling stock's adjoining units.
Connector sleeves are fabricated in accordance with GOST 2593-82 and consist of rubber tube (GOST 1335-84), cap type 1a or 16, bit type 1a or 16, buckles (all the elements in accordance with GOST 2593-82), O-ring GOST 38-72.
Name of sleeve |
Operating pressure of compressed air, MPa (kgc/cm2), no more than |
Dimensions, mm |
Additional pipe thread |
Mass, kg, no more than |
Range of application |
L |
L  |
d |
d 1
|
R 11 |
1,0(10) |
759 |
720 |
25 |
28 |
G ¼ - V |
2,63 |
Rolling stock with air channel with pipe-size G 1-V |
R 12 |
1,0(10) |
909 |
860 |
25 |
28 |
G 1 ¼ - V |
2,73 |
On locomotives and electric trains with air channel with pipe-size G 1-V |
R 13 |
1,0(10) |
449 |
410 |
25 |
28 |
G 1 ¼ - V |
2,23 |
On transit vehicles and electric train cars with air channel with pipe-size G 1-V |
R 14 |
1,0(10) |
599 |
560 |
25 |
28 |
G 1 ¼ - V |
2,43 |
On locomotives and narrow gage cars with air channel with pipe-size G 1-V |
R 17 B |
1,0 (10) |
759 |
710 |
32 |
35 |
G 1 ¼ - V |
2,9 |
On locomotives, electric trains, diesel-multiple unit trains, freight and passenger cars with air channel with pipe-size G 1 ¼ -V |
Connector sleeves R21, R23
OKP code 31 8442
Connector sleeves are intended for detachable flexjoint of air channels with brake cylinders or with drive of current connector. Sleeve R21 is applied on electric locomotives and diesel locomotives and R23 is applied on electric locomotives and electric trains.
Are fabricated in accordance with the requirements of GOST 2593-82 and consist of rubber tube GOST 1335-84, buckles, bit type 36 and 3v GOST 2593-82 with captive and connecting nuts in accordance with GOST 8959-75 and bit type 26 or 2a GOST 2593-82.
Name of sleeve |
Operating pressure of compressed air, MPa (kgc/cm2) |
Dimensions, mm |
Pipe thread |
Mass, kg |
L |
L |
d |
d 1 |
d 2 |
d 3 |
R 21
R 23 |
1,0(10)
1,0(10) |
700
995 |
680
980 |
19
19 |
25
25 |
G 1/2- V
G 3/4- V |
G 1/2- V
G 3/4- V |
1,85
1,96 |
Connector sleeve R31
OKP code 31 8442
Connector sleeve is intended for provision of detachable flexjoint of brake line with stop valve. Is applied on transit vehicles.
Sleeve is fabricated in accordance with GOST 2593-82 and consists of rubber tube GOST 1335-84, two buckles and two bits type 3a GOST 2593-82 with captive nuts in accordance with GOST 8959-75.
|
Operating pressure of compressed air, MPa (kgc/cm2), no more than
|
1,0 (10)
|
|
Additional thread
|
G 1/4 -V
|
|
Length of sleeve, mm
|
825
|
|
Mass, kg, no more than
|
1,93
|
Connector sleeve R32
OKP code 31 8442
Connector sleeve R32 is intended for provision of detachable flexjoint of air channels on rolling stock.
Is applied on transit vehicles. Sleeve is fabricated in accordance with the requirements of GOST 2593-82 and consist of rubber tube GOST 1335-84, two buckles, two bits type 36 GOST 2593-82 with captive and connecting nuts in accordance with GOST 8959-75.
|
Operating pressure of compressed air, MPa (kgc/cm2), no more than
|
1,0 (10)
|
|
Additional thread
|
G3/4-B
|
|
Length of sleeve, mm
|
880
|
|
Mass, kg, no more than
|
1,95
|
Connector sleeve R34
Connector sleeve R34 is intended for provision of detachable flexjoint of air channels on rolling stock. Is applied on transit vehicles.
Sleeve is fabricated in accordance with GOST 2593-82 and consists of rubber tube GOST 1335-
84, two buckles, two bits type 3v GOST 2593-82 with captive and connecting nuts in accordance with GOST 8959-75.
|
Operating pressure of compressed air, MPa (kgc/cm2), no more than
|
1,0 (10)
|
|
Additional thread
|
G 1/2-V
|
|
Length of sleeve, mm
|
885
|
|
Mass, kg, no more than
|
1,8
|
Connector sleeves R36A, R36B
OKP codes 31 8442; 31 8442
Connector sleeves R36A, R36B are intended for connection of brake air line with the air terminal unit. Range of application: freight cars of railway's rolling stock.
Sleeves type R36A and R36B consist of rubber tube GOST 1335-84, buckles, bits, back nut, nipple.
Are fabricated in accordance with TU 3184-501-05744521-94.
Name of sleeve |
Operating pressure of compressed air, MPa (kgc/cm2), no more than |
Dimensions, mm |
Internal diameter, mm |
Operating temperature range, degrees |
l |
L |
R 36 A
R 36 B
|
1,0(10)
1,0(10) |
510
1075 |
588
1153 |
16
16 |
from -55 to +80
from -55 to +80 |
Connector sleeve with electric contact 369 A
OKP code 31 8442
Connector sleeve 369A is intended for provision of flexible permanent connection of air channels and electric channels of electro-pneumatic brake of rolling stock's adjoining units.
Is applied on passenger locomotives and cars that are equipped with electro-pneumatic brakes according to insulated-return system. The sleeve is done on the basis of connector sleeve R17B GOST 2593-82 and contains of rubber tube 35D GOST 1335-84, end with electric contacts, bit type 1a GOST 2593-82, buckles, O-ring GOST 38-72, electric cable with two lines. The sleeve's end is bonded with end in accordance with GOST 2593-82. It contains one moving electric contact member that is isolated from the case in coupled position of adjoining ends and abridged on the case by their releasing.
The end's case is used as second contact.
Is fabricated in accordance with TU 3184-512-05744528-2000.
|
Operating pressure of compressed air, MPa (kgc/cm2), no more than
|
1,0 (10)
|
|
Amount of electric channels
|
2
|
|
Tension of electric current, V
|
50
|
|
Additional thread
|
G 1 1/2 -V
|
|
Length of sleeve, mm
|
759
|
|
Mass, kg, no more than
|
4,15
|
Connector sleeve 36V
OKP code 31 8442
Connector sleeve 36V is intended for connection of brake air line with the air terminal unit. Range of application: freight cars of railway's rolling stock.
Sleeve consists of rubber tube GOST 1335-84, buckles of diameter 41 mm, bits.
Is fabricated in accordance with TU 3184-501-05744521-94.
|
Operating pressure of compressed air, MPa (kgc/cm2), no more than
|
1,0 (10)
|
|
Internal diameter, mm
|
16
|
|
Length of sleeve, mm
|
525
|
Sleeve of current connector R40
OKP code 31 8442
Sleeve of current connector R40 is intended for provision of detachable flexjoint of air channel with current connector. Is applied on electric locomotives and electric multiple-unit trains.
Sleeve consists of polyethylene tube, beans, collars and captive nuts. Is fabricated in accordance with TU 24.05.971-80.
|
Operating pressure of compressed air, MPa (kgc/cm2), no more than
|
1,0 (10)
|
|
Additional thread
|
G 1/2-V
|
|
Length of sleeve, mm
|
1064
|
|
Mass, kg, no more than
|
1,2
|
|
|
